Free Shipping
Your position: Home / bafang MXUS Conversion Kit

MXUS Electric Bicycle kit 36V 250W 26”28”700C XF07 Front Wheel Brushless gear Motor E bike Conversion kit

Price:
USD
$225.00
    Please select the information you wantX
  • Model+Voltage Power+Rim size:
    XF07 Front+36V 250W+26"
    XF07 Front+36V 250W+28"
    XF07 Front+36V 250W+700C
  • Ships From:
    Germany
    China
Quantity:
-
+
(324 available)
Shipping Cost:
to
Estimated Delivery Time:
Please select the country you want to ship from

From Pswpower

If you choose ships from Europe stock,we will send it from Europe warehouse.below countries,DDP Duty service is included.

Belgium, Luxembourg, Slovakia, Czech, Hungary, Austria, Netherlands, Denmark, France, Germany, England, Ireland, Italy, Poland, Slovenia, Spain, Finland, Latvia, Lithuania, Sweden, Bulgaria, Estonia, Greece, Monaco, Portugal, Romania

If you choose ships from Russia Stock,we will send it from Moscow warehouse.

MXUS EBike Electric Bike Bicycle kit 36V 250W 26” 28” 700C XF07 Front Wheel Brushless gear Hub Motor for Electric Bicycle E bike Conversion Kit

 (26 inch on load max speed from 25km/h to 28km/h by LCD5,28 inch 700C on load max speed from 25km/h to 30km/h by LCD5)

Package include:

1.Hand built double walled rim complete with 13G spokes

2.KT 36V 250W 6Mosfets 15A Brushless DC Sine Wave Controller

3.LCD: KT-LCD5

4.Wuxing Brand Throttle

5.Wuxing Brand Brake Lever

6.PAS: Dual Hall Sensor

7.Wuxing Brand LED light

8.Controller case

9.Battery cable(Pay attention to the positive and negative poles,If the installation is wrong,Controller will be burned, No warranty for this way)

10. 1 to 5 cable

 

XF07 Front Motor

Position                                  Front
Construction                          Gear
Rated Voltage(V)                       36
Rated Power(W)                       250
Weight(Kg)                                  2.8
Reduction Ratio                     1:4.4
Wheel Diameter(lnch)              20-28
Rated Speed(km/h)             RPM 270

Magnet Poles(2P)                         10
Fork size (Dropout Size)         100mm
Brake Type                    V/Disk brake
Operating Temperature(℃)      -20-45
Efficiency(%)                         ≥ 78%
Color                                       Black
Cabling Route          Shaft center right 
Noise Grade(DB)                         ≤55
IP Grade                                   IP54
Salt Spray Test Standard           24/96 

Connector:hall sensor and sensorless compatible

Speed Detection Signal(Pulses/Cycle)  1

Certifications ROHS/CE

Spoke Specification 36H*13G

Cable Length(mm), Connection Type 250 G9.1

 

36V 250W 6Mosfets 15A Brushless DC Sine Wave Controller SPEC:

Technical Data:

Input Voltage: DC 36V

Min. Voltage: DC20V/30±0.5V

Max. Current: 15±1A

Speed set: 1-4.2V

Brake Input: Low-Level

Size: 86x52x31mm

Color: Silver

Weight: 0.3kg

6 pcs MOSFET

Applicatoin: Max. 36V 250W

Fits 250W sensor motor

WXT-XF08(C)-01-Model1111111

Advantages:

This controller can working without the PAS(Pulse Padel Assistant Sensor)

Sine Wave Controller (more stable, high efficiency, low current consumption, long life)

Support hydraudic brake sensor or brake sensor connector

Support LED Control Panel or LCD Control Panel

Support  36V Light Control

Support speed limit to 70%

Support Cruise Function

Support speaker and led right

 

KT-LCD5 E-Bike LCD Meter for KT Series Controllers. It only fits KT series controllers. It is not suitable for other controllers.

1. Dimension: 16.5X51X77mm

2. Voltage: fits for 24V, 36V or 48V batteries.

Note: How to determine the value of the parameter P5 ? 

The formula is LVC+P5/3.77.

For 24V battery, LVC=20V, P5/3.77=1. 

For 36V battery, LVC=30V, P5/3.77=1.5.

For 48V battery, LVC=40V, P5/3.77=2.

You can adjust P5 parameter by your own battery discharge curve.

It is a smart LCD. You can not test it by only voltage. You need to install it on your E-Bike and pedal for 3-5 seconds. Then the LCD will show battery level normally.

The operation manual is same as KT-LCD5 except power and temperature display. You can follow the KT-LCD5 manual to operate the panel.

Water proof Cable Length: 50cm

 
Average rating:
Share your thoughts with other customers
Write a review
Product reviews can be carried out after the member login, please click here to login
Links:mounter machine